Set Up Your AWS DeepLens Device

-


When setting up your AWS DeepLens device, you perform the following tasks while your computer is connected to your device's AMDC-NNNN network:
  • Enable the device's internet connection through your home or office wireless (Wi-Fi) or wired (Ethernet) network.
  • Attach to your device the AWS-provisioned security certificate as discussed inRegister Your AWS DeepLens Device.
  • Set up login access to the device, including with an SSH connection or a wired connection.
  • Optionally, download the streaming certificate from the device to enable viewing project video output in a supported browser.
If your computer is no longer a member of the AMDC-NNNN network because your AWS DeepLens device has exited setup mode, follow the instructions in Connect to Your AWS DeepLens Device's Wi-Fi Network to establish a connection and to open the device setup page, again, before proceeding further.
To set up your AWS DeepLens device
  1. If your AWS DeepLens device has a more recent version of the software installed, you won't be prompted with the following tasks. Skip to Step 2 below. Otherwise, proceed to the Device setup page, which you opened after connecting to the device, to set up your home or office network to connect your device to the internet:
    1. Under Step 1: Connect to network, choose your home or office Wi-Fi network SSID from the Wi-Fi network ID drop-down list. Type the Wi-Fi network password
      Image: Initial Device Setup Page
      Alternatively, You can choose Use Ethernet to connect your AWS DeepLens device to the internet.
    2. Choose Next to connect the device to the internet.
    3. On the next page, Choose Install and reboot to install the latest software on the device and to restart the device.
      Image: Device setup installing the initial software updates and rebooting the device
      After the software update is installed and the device restarted, reconnect your computer to your device's AMDC-NNNN network, navigate to http://deeplens.config in a web browser to open the updated device setup application, and to complete the rest of the device setup as shown in Step 2.
  2. When your device has an updated software installed, starting the device setup application (e.g., http://deeplens.config) opens a browser page similar to the following:
    Image: Updated device setup page
    The Connect your device to your home or office network section shows the device's internet connection status as Online. You can choose Edit to update the internet connection by choosing a different Wi-Fi network or a wired network with a micro-USB-to-Ethernet adaptor. Otherwise, continue to the next step to complete the rest of the device configuration.
  3. Under Upload security certificate to associate your AWS DeepLens to your AWS account on the updated Configure your AWS DeepLens page, do the following:
    1. Choose Browse to open a file picker.
    2. Locate and choose the security certificate that you downloaded when preparing your AWS account for AWS DeepLens,
    3. Choose Upload zip file to attach the certificate to the device.
      Note
      The downloaded security certificate for the device is a .zip file. Upload the unzipped certificate file as-is.
    For device setup update after the initial registration, your device has a previous certificate installed. In this case, choose Edit and follow the instructions above in this step to upload the new certificate.
  4. Under Set a password to control how you access and update the device, complete the following steps to configure device access.
    1. For the initial registration, type a password in Create a password. The password must be at minimum eight characters long and contain at least one number, an uppercase letter, and a special character (e.g., '*', '&', '#', '$', '%', '@', or '!'). You need this password to log in to your device either using an SSH connection (if enabled below) or using a hardwired monitor, a USB mouse and/or a USB keyboard.
    2. For SSH server, choose Enable or Disable. If enabled, SSH allows you to log in to your device using an SSH terminal on your Mac or Linux computer or using PuTTY or another SSH client on your Windows computer.
    For subsequent configuration updates after the initial registration, you can choose Edit and follow the ensuing instructions to update the password.
  5. Optionally, on the upper-right corner of the device setup page, choose Enable video streaming to enable viewing project video output using a supported browser. For the initial registration, we recommend that you skip this option and enable it later when updating the device configuration after you've become more familiar with AWS DeepLens.
  6. Review the settings. Then, choose Finish to complete setting up the device and to terminate your connection to the device's Wi-Fi network. Make sure to connect your computer back to your home or office network.
    Note
    To ensure the setup completes successfully, make sure that AWS DeepLens device has access to ports 8883 and 8443 and is not blocked by your network firewall policy.
    If the AWS DeepLens device's connection to the internet repeated turns on and off after you chose Finish, restart your home or office Wi-Fi network.

This completes the device registration. Verify you device registration status before moving on to create and deploy a project to your AWS DeepLens device.

Comments

  1. PatrickOctober 22, 2019 at 7:47 PM

    Hi, what does the acronym AMDC stand for in AMDC-NNNN?

    ReplyDelete

Post a Comment

Popular posts from this blog

How to download a file using command prompt (cmd) Windows?

-
Image
If you’re like most Internet users, you download various types of files now and then. You either download these files with your web browser or some download manager software. Have you ever considered downloading files using the command prompt i.e. CMD? If not, we recommend you to try it. It’s quite interesting apart from being very useful as well. In this article, we’ll show you how to download a file using command prompt aka CMD. How to download a file using command prompt?   There are several useful commands for the Command Prompt and one of them is  bitsadmin . Though bitsadmin has several uses, here we shall limit this article to its role in downloading files only. If you want to read the details about bitsadmin syntax, continue reading this section. Otherwise, you can scroll down to the next section –  Downloading a file .   The syntax of bitsadmin is : BITSADMIN [/RAWRETURN] [/WRAP | /NOWRAP] command   As you know, the parts of the syntax inside the square bra
Read more

The future of Artificial Intelligence: 6 ways it will impact everyday life

-
Image
Technology moves at breakneck speed, and we now have more power in our pockets than we had in our homes in the 1990s. Artificial intelligence (AI) has been a fascinating concept of science fiction for decades, but many researchers think we’re finally getting close to making AI a reality.  NPR notes that in the last few years, scientists have made breakthroughs in “machine learning,” using neural networks, which mimic the processes of real neurons. This is a type of “deep learning” that allows machines to process information for themselves on a very sophisticated level, allowing them to perform complex functions like facial recognition. Big data is speeding up the AI development process, and we may be seeing more integration of AI technology in our everyday lives relatively soon. While much of this technology is still fairly rudimentary at the moment, we can expect sophisticated AI to one day significantly impact our everyday lives. Here are 6 ways AI might affect us in the futu
Read more

How to Include ThreeJs in Your Projects

-
Image
HOW TO INCLUDE three.js IN YOUR PROJECTS There are quite a few different ways to include three.js in your JavaScript application, some of them simple, some of them a little more complex, however, they all boil down to one simple idea: you need to include one (and  only one) of these three files in your project: three.js three.min.js three.module.js You can view them all  on the three.js GitHub repo , which we’ll explore in the next chapter. Each of these files a version of the three.js core, meaning that once you’ve included one of them in your application, you are all ready to get started in creating beautiful 3D scenes. There are two main ways to include these files in your project: include them in a  script tag  in your HTML import them directly into your JavaScript files. We’ll explore how to do in Section Two What’s the Difference Between these Files? The  three.js  file is intended to be included in a  <script>  tag in your  index.html  file, like s
Read more